Drills
Soilmec SR30
Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions.
- The hydraulic drilling rig SR-30 has been specially designed for suiting the following applications:
- LDP cased bore piles with casing driven directly by rotary head or optionally by casing oscillator powered by the base carrier itself
- LDP deep uncased bored piles stabilized by drilling fluid or dry hole
- CFA (Continuous Flight Auger) piles by means of long auger string
- TJ (Turbojet®) / TTJ (Twin Shaft Turbojet) – soil consolidation
- GK-5 (Diaphragm Wall) – with hydraulic guided grab.
- The SR-30 is equipped with the DRILLING MATE SYSTEM (DMS) on 12′ touch screen for monitoring and control of the rig performances and operating parameters .
Soilmec SR-50
The Soilmec SR-50 is an efficient drilling machine capable of high torque and great maneuverability for all drilled shaft jobs. With a detachable lower mast segment this machine is perfect for doing over-sized shafts in the 4′ to 8′ diameter range without having to mobilize a large drill to site. The SR-50 also has a low headroom kit so drilled shafts can be completed despite overhead obstructions. With drill depths to 150′, the SR-50 brings immense performance in a mid-sized package.
The hydraulic drilling rig SR-50 has been specially designed for suiting the following applications:
- Cased bored piles with casing driven directly by rotary head and by casing oscillator powered by the base carrier itself
- Deep uncased bored piles stabilized by drilling fluid or dry hole
- CFA (Continuous Flight Auger) piles by means of long auger string
- BFS (Bottom Feed System) for dry bottom feed stone column installation
- DP (Displacement Piles)
Soilmec SR-625
The Soilmec SR-65 is a track mounted rig, making it able to access even hard to reach job sites. It is especially capable in extremely hard rock and difficult drilling conditions. It is large enough for big jobs, and setup is extremely uncomplicated.
The hydraulic drilling rig SR-65 is mounted on a Soilmec base carrier and has been specially designed for suiting the following applications:
- Cased bore piles with casing driven directly through rotary head or optionally by casing oscillator powered by the base carrier itself
- Very deep bored piles stabilized by drilling fluid or dry hole
- CFA piles by means of very long auger string
- CAP piles with double rotary
- Displacement piles
- Soil-mixing
- Reverse circulation
- It can be converted to work with an hydraulic grab for diaphragm walls
Soilmec SR-90
The hydraulic drilling rig SR-90 has been specially designed for suiting the subsequent applications:
- Cased bore piles with casing driven directly by rotary head or optionally by casing oscillator powered by the base carrier itself
- Deep uncased bored piles stabilized by drilling fluid or dry hole
- CFA (Continuous Flight Auger) piles by means of long auger string
- CAP (Cased Augered Piles) piles with double rotary system;
- DP (Displacement Piles) on demand
- TJ (Turbo Jet) – column soil consolidation on demand
- Soil-mixing – column soil consolidation on demand
- TTJ (Twin Shaft Turbojet) – panel soil consolidation
- RCDS (Reverse Circulation Drilling System) on demand
- DW it can be converted into Diaphragm Wall base machine to work with an hydraulic grab on demand
The SR-90 in kelly version is equipped with the Drilling Mate System (DMS) on a 12″ touch screen for monitoring and control of the operating parameters. The DMS equipment includes fault checking and reporting and a monitor unit designed to display:
- Engine information and diagnostic ability
- Pump pressures
- Drilling depth
- Rotary speed and pressure
- Crowd pressure
- Graphic drilling trends
- Mast verticality
Cranes
TEREX HC 110 Hydraulic Crawler Crane
The TEREX HC 110 features include:
- 110 ton maximum lift capacity
- 230 ft. maximum main boom length
- 200+70 ft. maximum lift crane boom & jib length
- 40,640 lbs maximum single line pull, 565 fpm maximum line speed
TEREX T 750 Truck Crane
The TEREX T 750 features include:
- 75 ton maximum lifting capacity
- 126 ft. Maximum boom length
- 192 ft. Maximum tip height
Fassi F800 XP Knuckle Boom Crane
- 7 ton maximum lifting capcity
- 53 ft maximum boom length
- 6 hydraulic booms
Piling Units
Enteco E7060 Hydraulic Piling Rig
The Enteco is a pile driving rig suitable for the application of hydraulic impact hammers up to a 15 ton total weight. The E7060 is specifically designed to drive prefab concrete piles and steel piles up to 18 meters in length or up to 22 meters by adding a mast extension. The E7060 can also be equipped with Rotary Drives, for the construction of CFA piles, Soil Displacement Piles, or Bored Piles.
Main specifications include:
- Operating weight (without hammer) of 65 tons
- Hammer max. Weight of 15 tons
- Maximum pile length of 22 meters
- Free-fall winches with patented free-fall device and grooved drum
- Wide inclination angle of the mast, longitudinal and lateral
- Telescopic mast, 7 meter stroke
- Expandable tracks, the telescopic counterweight and the rear outriggers (optional) make this multi-task rig extremely stable in all working conditions
- Self-erecting equipment, telescopic mast and tilting cathead
- Ease of transportation, no need to remove the hammer.
Linkbelt MP2
The Linkbelt MP2 is a piling unit mounted on a Linkbelt 330 LX body. This unit trams faster than other tracked piling units making very effective for piles spaced at distances such as for pipe racks. It also transports in one load and can setup within minutes of arriving on site. Is capable of installing piles to a maximum length of 18.29m
Oscillators
LEFFER Casing Oscillator
The hydraulic casing oscillators have been designed in accordance with the latest technical know-how. A prominent feature of the equipment is the clamping collar consisting of five links operating on the boring implement. The individual links surround the casing like a chain so that a constant surface pressure is exerted on the casing circumference. In addition, the large height of the collar (400 and 700 mm. resp.) prevents any damage to the casing. Bu means of easily exchangeable reducer pieces the oscillator can be converted within a few minutes to a smaller casing diameter. The collar opens uniformly and enables unproblematic insertion of the casing with the cutting shoe. Another advantage is the low height on the excavator side. The excavator can be swivelled by 360 ° in the coupled condition. Attachment at the excavator itself is torque rigid and guarantees the transmission of the full rotating movement of 25° to the casing if the excavator is firmly situated.
Impact Hammers
| Berminghammer B-3005 | ||
| Ram Weight x Max. Stroke | 34,500 ft/lb | 47 kN/m |
| Impact Energy | 21,533 ft/lb | 29 kN/m |
| Ram Weight/Mass | 3000 lb | 1,400 kg |
| Maximum Ram Stroke | 11.5 ft | 3.5 m |
| Impact Block Weight/Mass | 802 lbs | 364 kg |
| Blows Per Minute | 36-60 | 36-60 |
| Operating Weight | ||
| Total Operating Weight/Mass | 11,000 lb | 4,989kg |
| Weight of Tool Box | 150 lb | |
| Total Shipping Weight/Mass | 11,150 lb | 5,056 kg |
| Capacity | ||
| Fuel Tank | 16 gal (U.S) | 62 Liters |
| Fuel Consumption | 1.4 gal/hr | 5.3 liters/hr |
| Oil Tank | 1.9 gal (U.S) | 7.3Liters |
| Oil Consumption | 0.16 gal/hr | 0.6liters/hr |
| Download / view PDF | ||
| Berminghammer B-3505 | ||
| Performance | ||
| Ram Weight x Max. Stroke | 46,000 ft/lb | 62 kN/m |
| Impact Energy | 28,711 ft/lb | 8.9 kN/m |
| Ram Weight/Mass | 4,000 lb | 1,800 kg |
| Maximum Ram Stroke | 11.5 ft | 3.5 m |
| Impact Block Weight/Mass | 802 lbs | 364 kg |
| Blows Per Minute | 36-60 | 36-60 |
| Operating Weight | ||
| Total Operating Weight/Mass | 12,000 lb | 5,442kg |
| Weight of Tool Box | 150 lb | 68 kg |
| Total Shipping Weight/Mass | 12,150 lb | 5,510 kg |
| Capacity | ||
| Fuel Tank | 16 gal (U.S) | 62 Liters |
| Fuel Consumption | 1.4 gal/hr | 5.3 liters/hr |
| Oil Tank | 1.9 gal (U.S) | 7.3 Liters |
| Oil Consumption | 0.16 gal/hr | 0.6 liters/hr |
| Download / view PDF | ||
| Berminghammer B-4005 | ||
| Performance | ||
| Ram Weight x Max. Stroke | 57,500 ft/lb | 78 kN/m |
| Impact Energy | 35,900 ft/lb | 49 kN/m |
| Ram Weight/Mass | 5,000 lb | 2,300 kg |
| Maximum Ram Stroke | 11.5 ft | 3.5 m |
| Impact Block Weight/Mass | 1,326 lbs | 601 kg |
| Blows Per Minute | 36-60 | 36-60 |
| Operating Weight | ||
| Total Operating Weight/Mass | 16,000 lb | 7,258 kg |
| Weight of Tool Box | 150 lb | 68 kg |
| Total Shipping Weight/Mass | 16,150 lb | 7,326 kg |
| Capacity | ||
| Fuel Tank | 20 gal (U.S) | 76 Liters |
| Fuel Consumption | 2.1 gal/hr | 7.9 liters/hr |
| Oil Tank | 6.1 gal (U.S) | 23 Liters |
| Oil Consumption | 0.24 gal/hr | 0.9 liters/hr |
| Download / view PDF | ||
| Berminghammer B-4505 | ||
| Performance | ||
| Ram Weight x Max. Stroke | 75,900 ft/lb | 103 kN/m |
| Impact Energy | 47,400 ft/lb | 64 kN/m |
| Ram Weight/Mass | 6,600 lb | 3,000 kg |
| Maximum Ram Stroke | 11.5 ft | 3.5 m |
| Impact Block Weight/Mass | 1,326 lbs | 601 kg |
| Blows Per Minute | 36-60 | 36-60 |
| Operating Weight | ||
| Total Operating Weight/Mass | 17,600 lb | 7,982 kg |
| Weight of Tool Box | 150 lb | 68 kg |
| Total Shipping Weight/Mass | 17,750 lb | 8,050 kg |
| Capacity | ||
| Fuel Tank | 20 gal (U.S) | 76 Liters |
| Fuel Consumption | 2.1 gal/hr | 7.9 liters/hr |
| Oil Tank | 6.1 gal (U.S) | 23 Liters |
| Oil Consumption | 0.24 gal/hr | 0.9 liters/hr |
| Download / view PDF | ||
| ICE I-19V2 | ||
| Working Specifications | ||
| Ram Weight | 4,015 lbs | 1,820 kg |
| Rated Energy (fuel setting 4) | 46,170 ft/lbs | 62,600Nm |
| Stroke at Rated Energy (fuel setting 4) | 11.5 ft | 3505mm |
| Energy at Fuel Setting 3 | 42,125 ft/lbs | 57,110Nm |
| Energy at Fuel Setting 2 | 38,175 ft/lbs | 81,760Nm |
| Energy at Fuel Setting 1 | 34,225 ft/lbs | 46,400Nm |
| Energy at Maximum Stroke | 49,150 ft/lbs | 66,645Nm |
| Geometric Maximum Stroke | 12.25 ft | 3,735mm |
| Blows Per Minute | 35-52 | 35-52 |
| Download / view PDF | ||
| Weights | ||
| Bare Hammer with Trip | 8,890 lbs | |
| Hammer with Box Lead Guides | 9,725 lbs | |
| Drive Cap Base | DCB-1 | |
| Drive Cap Base Weight | 1,065 lbs | 483 kg |
| Striker Plate | 460 lbs | 209 kg |
| Cushion Material | 55 lbs | 25 kg |
| Pile Insert | DCH-1 | |
| Pile Insert Weight | 780 lbs | 345 kg |
| Operating Weight w/ Drive Cap | 12,085 lbs | 5,472 kg |
| Capacities | ||
| Fuel Tank | 9.9 gal | 37.5L |
| Lube Oil Tank | 2.6 gal | 10L |
| Dimensions | ||
| Hammer Length (L) | 17.4 ft | 5,300 mm |
| Length with Trip Guides (GL) | 19.4 ft | 5,925 mm |
| Length at Max Stroke (OL) | 24.8 ft | 7,550 mm |
| Overall Width (W) | 25.5 in | 648 mm |
| Standard Leads Width (LW) | 20 in | 508 mm |
| Overall Depth (CR+CF) | 30in | 763 mm |
| Centerline to Rear (CR) | 14.7 in | 373 mm |
| Centerline to Front (CF) | 15.4 in | 390 mm |
| ICE I-30 | ||
| Working Specifications | ||
| Ram Weight | 6,615 lbs | 3000kg |
| Rated Energy (fuel setting 4) | 71,700 ft/lbs | 97,212nm |
| Stroke at Rated Energy (fuel setting 4) | 10.84 ft | 3300mm |
| Maximum Stroke | 12.14 ft | 3700mm |
| Blows Per Minute | 35-53 | |
| Weights | ||
| Hammer with USA Guides | 14,250 lbs | 6465 kg |
| Drive Cap Base (DCB-1) | 1,095 lbs | 499 kg |
| Striker Plate | 450 lbs | 204 kg |
| Cushion Material | 51 lbs | 23 kg |
| Typical Pile Insert (DCH-1) | 690 lbs | 313 kg |
| Typical Operating Weight | 16,536 lbs | 7,500 kg |
| Capacities | ||
| Diesel Fuel Tank | 16.8 gal | 63.5L |
| Lube Oil Tank | 4.6 gal | 17.5L |
| Ether Tank | 0.5 gal | 1.9L |
| Dimensions | ||
| Hammer Length | 16.1 ft | 4,910 mm |
| Length with Trip Guides | 20.8 ft | 6,330 mm |
| Length with Extension | 17.7 ft | 5,410 mm |
| Overall Width | 25.3 in | 643 mm |
| Width for Box Leads | 26 in | 660 mm |
| Overall Depth | 32.7in | 830 mm |
| Centerline to Rear | 17.7 in | 450 mm |
| Centerline to Front | 15 in | 380 mm |
| Download / view PDF | ||
| D25-32 Data | ||
| Energy Per Blow, Adjustable | ||
| Pump Setting 1 | 29,510 ft.lbs | 40.0 kNm |
| Pump Setting 2 | 38,830 ft.lbs | 58.5 kNm |
| Pump Setting 3 | 52,470 ft.lbs | 71.1 kNm |
| Pump Setting 4 | 58,300 ft.lbs | 79.0 kNm |
| Frequency | 35 – 50 blows/min | |
| Related Piston Stroke | 11.8 – 5.7 ft. | 3.6 – 1.7 m |
| Maximum batter w/o upper cyl. ext. | 1:5 | |
| With upper cyl. extension | 1:1 | |
| Fuel consumption at full load | 8.0 L/hr. | 2.11 gal./hr. |
| Oil consumption | 1.0 L/hr. | 0.26 gal./hr |
| Approximate Weights | ||
| Hammer | 5610 kg | 12,370 lbs |
| Piston | 2500kg | 5,515 lbs |
| Hammer with standard guiding | 6710 kg | 14,800 lbs |
| Capacities | ||
| Fuel Tank | 67 L | 17.7 gal. |
| Oil Tank | 19 L | 5.0 gal. |
| Dimensions | ||
| A | 17.8 ft. | 5425 mm |
| 21.3 ft. | 6490 mm | |
| LH | 22.5 ft. | 6860 mm |
| B | 17.5 in | 445 mm |
| B1 | 24.0 in | 610 mm |
| C | 19.0 in | 482 mm |
| D | 24.5 in | 635 mm |
| D1 | 32.0 in | 812 mm |
| W | 26.0 in | 660 mm |
| Download / view PDF | ||
| APE D46 | ||
| Working Specifications | ||
| Ram Weight | 10,141 lbs | 4,600 kg |
| Rated Energy (fuel setting 4) | 119,780 ft/lbs | 162,400Nm |
| Stroke at Rated Energy (fuel setting 4) | 11.81 ft | 3600mm |
| Energy at Fuel Setting 3 | 106,470 ft/lbs | 144,350Nm |
| Energy at Fuel Setting 2 | 96,490 ft/lbs | 130,820Nm |
| Energy at Fuel Setting 1 | 86,500 ft/lbs | 117,290Nm |
| Energy at Maximum Stroke | 132,550 ft/lbs | 179,720Nm |
| Geometric Maximum Stroke | 13.07 ft | 3,985 mm |
| Blows Per Minute | 35-52 | |
| Weights | ||
| Bare Hammer with Trip | 21,682 lbs | 9,835 kg |
| Hammer with Box Lead Guides | 21,065 lbs | 10,055 kg |
| Drive Cap Base | DCB-2HD | |
| Drive Cap Base Weight | 1,670 lbs | 758 kg |
| Striker Plate | 645 lbs | 293 kg |
| Cushion Material | 134 lbs | 61 kg |
| Pile Insert | DCC-16 | |
| Pile Insert Weight | 1,260 lbs | 572 kg |
| Operating Weight w/ Drive Cap | 24,774 lbs | 12,239 kg |
| Capacities | ||
| Fuel Tank | 21.9 gal | 83L |
| Lube Oil Tank | 4.5 gal | 17L |
| Dimensions | ||
| Hammer Length (L) | 18.8 ft | 5,740 mm |
| Length with Trip Guides (GL) | 21 ft | 6,415 mm |
| Length at Max Stroke (OL) | 26 ft | 7,915 mm |
| Overall Width (W) | 37.6 in | 954 mm |
| Standard Leads Width (LW) | 32 in | 813 mm |
| Overall Depth (CR+CF) | 36.1in | 918 mm |
| Centerline to Rear (CR) | 18.8 in | 478 mm |
| Centerline to Front (CF) | 17.3 in | 440 mm |
| Download / view PDF | ||
| Pileco D36 | ||
| Stroke Measurements | ||
| Piston Weight | 7,938 lbs | |
| Energy at Pump Setting 1 | 40,900 ft./lb | |
| Energy at Pump Setting 2 | 55,360 ft./lb | |
| Energy at Pump Setting 3 | 69,620 ft./lb | |
| Energy at Pump Setting 4 | 83,880 ft./lb | |
| Download / view PDF | ||
| BSP CX85 Hydraulic Hammer | ||
| Ram Mass | 15425 lbs | |
| Max Impact Energy | 60,000 Ft.lbs | |
| Blow rate at rated energy | 4-bpm | |
| Basic Hammer Weight w/o helmet | 22,700 lbs | |
| Basic hammer length | 16′ 7″ | |
| Minimum USA Leader Size | 26″ | |
| Operating Pressure | 3400 psi | |
| Hydraulic Flow Required | 55 US gpm | |
| Download / view PDF | ||
Vibro Hammers
| J&M 44-50 | ||
| Vibrator | ||
| Eccentric Movement | 4,400 in./lbs | 5,070kg/cm |
| Frequency | 1600 vpm | |
| Centrifugal Force | 160 tons | 1425 kN |
| Amplitude (free hanging) | 1.17 in | 30 mm |
| Max Line Pull for Extracting (variable) | 80 ton | 710 kN |
| Weight (no clamps or hoses) | 11,500 lbs | 5,215 kg |
| Non-Vibrating Weight | 4,000 lbs | 1,815 kg |
| Height (without clamp) | 83 in. | 2,110 mm |
| Length | 97 in | 2,465 mm |
| Width | 22 in | 560 mm |
| Throat Width | 14.25 in | 360 mm |
| Hydraulic Hose Length | 150 ft | 45 m |
| Hydraulic Hose Weight | 1,700 lbs | 770 kg |
| Power Unit | ||
| Engine | Caterpillar 3408TA | |
| Power | 535 HP (399kW) | |
| Operating Speed | 2100 rpm | |
| Drive Pressure | 5,000 psi | 345 bar |
| Drive Flow | 155 gpm | 590 lpm |
| Clamp Pressure | 4,800 psi | 330 bar |
| Clamp Flow | 6.5 gpm | 25 lpm |
| Weight (wé full fluid & fuel) | 15,400 lbs | 6,985 kg |
| Length | 154 in | 3,910 mm |
| Width | 60 in | 1,525 mm |
| Height | 96 in | 2,435 mm |
| Hydraulic Reservoir | 385 gal | 1,460 L |
| Fuel Capacity | 150 gal | 570 L |
| Download / view PDF | ||